9.0 and later a "cold migration" or "host to host migration", is not vMotion and is supported. Specifically for Cisco Unified Attendant Consoles, this means the CUxAC VM must not be doing any Hot Swap or taking any active calls, with no active Directory Synchronization in progress. These migrations require backing up the application, reinstalling on a new OVA file, and and restoring the application. The only supported scenario is a manual move to a different server, e.g. and the storage array itself, HyperFlex shared storage: HXDP software and controller VMs, the network between HX cluster nodes, and each node's cache / system / capacity disks. This needs to be accounted for in VM Placement. You must also follow any compatibility instructions from your hardware providers for the server model, network elements and storage system you are using. "Complex" virtualization environments are defined as: Prevalent 3rd-party infrastructure not provided by Cisco, Performance debugging & other issues where isolation/root cause is not straightforward. Caveated Support for VMware CPU Reservations and Distributed Resource Scheduler, Virtualization for Cisco Unified Communications Manager (CUCM), Click here to download support for M4 and older hardware, Supported Versions of VMware vSphere ESXi, click to download OVA file for this version, Click here to download support of older/non-orderable servers, www.cisco.com/c/en/us/support/unified-communications/hosted-collaboration-solution-hcs/tsd-products-support-series-home.html. If the UC app is listed as "Partial" support, then support is "maintenance mode only" as described below: Distributed Resource Scheduler (DRS) E.g. See also VMware Data Recovery and Copy Virtual Machine. 1 Not supported for other applications. Some virtualized UCS servers are configured with multiple physical NICs (see UCS page at http://www.cisco.com/go/swonly). Virtual Machine File System (VMFS) Cisco TAC will isolate Collaboration app issues to the app or infrastructure. Testing has shown there is a slight risk of calls in progress being impacted for a few seconds as the migration occurs, with worst case result of the affected calls being dropped. b. VMsafe Note that Cisco Unified Communications applications upgrades, patches and updates can not be delivered through VMware Update Manager. Customers who wish to add additional vcpu and/or additional vram beyond this minimum to improve performance may do so, but note the following: IOPS and Storage System Performance Requirements. We don't use username/password authentication to configure a SIP trunk between Asterisk and CUCM, so select the following options: Authentication - select None. Failovers to other servers must not result in an unsupported deployment model (e.g. Cisco recommends to power off the VMs before the SAN replication occurs. This will occur automatically. Cisco Collaboration apps do not consult on or debug virtual switch configuration outside of networking guidance in design guides. For more information, see http://blogs.cisco.com/datacenter/comments/cisco_and_vmware_validated_architecture_for_long_distance_vmotion/ and http://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns224/ns836/white_paper_c11-557822.pdf. For all other details on hardware and VMware support, refer to. Updates are performed automatically. In the popup window choose Interactive Tools Upgrade. VMware vShield BE7000M (M5) appliance uses Intel Xeon 6132 CPU (14C/2.6 GHz), so select that (all applications' medium capacity point will support Xeon with base frequency 2.60 GHz). For details on "legacy" virtualization support (i.e. This will occur automatically. Adding vRAM is supported but requires VM to be shutdown first. Prior to ESXi 5.1, VM must be installed on shared storage (SAN) and source and destination physical servers must be connected to same SAN. You can run a 3rd-party RAID calculator to double-check if 6x300GB in a single RAID5 will accommodate. 11.5(1) and later Advanced features not included (HA, vMotion, DRS, etc.). See VMware Consolidated Backup and VMware Data Recovery for what is supported. To date, Cisco has not discovered any issues with Collaboration apps due to a newer vmv version. Prior to copying, the VM must first be shutdown (which will shut down the virtual server, the UC OS and the UC application). Older versions used 2x80 GB or other configurations as shown in tables above. You can run the HyperFlex Sizer (partner-level access) to doublecheck if HX Edge cluster will accommodate. You must follow any compatibility instructions from your hardware/software providers for the server model, network elements and storage system you are using. 2 This may be because the feature is N/A for a UC deployment, or it has not been sufficiently tested before the app can support, or it causes an issue with the app that must be worked around on either VMware or Cisco side. Any 3rd-party public cloud offers based on non-VMware technology (e.g. OVAs configured differently than the predefined templates are not supported unless specifically allowed on the app's page on www.cisco.com/go/virtualized-collaboration. "Maintenance mode only" - VMware vMotion by definition operates on live VMs, but the VM running the UC app must be "live but quiescent". If VSA is desired to be used as shared storage for a virtualized Cisco Collaboration deployment, it must meet the storage requirements for UC on UCS Specs-based or 3rd-party Server Specs-based (e.g. Note that when VMware vCenter is not required and is not used, then VMware vSphere ESXi's default management interface is its free/included VMware vSphere Client (formerly branded VI Client). Not supported for other applications. Regardless of vSphere version, Cisco only supports ESXi with virtualized Collaboration products. NOTE: support varies by app and version. Select the toplevel SKU for a new HX Edge cluster (which will contain HX Edge nodes and required software subscriptions) and cluster node model HX220C-M5SX, quantity 6. LoM: 2x10GE Cu LoM LAN + 1x1GE CIMC (RJ45). VDP in vSphere ESXi 5.1 replaces "VDR" (vSphere Data Recovery / VMware Data Recovery) in prior ESXi releases: see http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2016565. 1, 2 or 3 ESXi contains several optimizations for real-time applications and is therefore what Cisco will support. Elements may be Cisco or 3rd-party, physical or virtual. Refer to the VMware documentation for requirements to use this feature. To configure a trunk, proceed to Connectivity -> Trunks. No version downgrades. Before reading the best practices below, verify support at Supported Editions and Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client. VMware Fault Tolerance 9.x Before reading the best practices below, verify support at Supported Editions and Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client. Not supported. Destination physical server must not end up with over-subscribed hardware after the migration. Cisco Public CUCM 12.5 Upgrade/Downgrade Consideration . Logical Cores do not increase the number of physical cores available to apps. This "customer convenience" feature provides easy migration of a live system from one SAN to another SAN. Supported capacity and co-residency rules for UC must be followed before and after the migration. Y(C) = Supported with Caveats - see Best Practices for details, Y(P) = Partial (limited) support only - see Best Practices for details. 7.x of UC apps with VMware vSphere on limited 3rd-party servers), see the following links: The vmv represents the version of virtual hardware. The system reboots twice. VM can be installed on DAS and source/destination physical servers can have different DAS yet still vMotion the VM. See vMotion for what is supported. Follow HX DIMM population rules for 8x16GB=128GB. Destination physical server must not end up with over-subscribed hardware after the migration. . UCM cluster nodes require fixed capacity points with fixed-configuration VMs in the Cisco-provided OVA for UCM. the recommendations above only apply to single cluster deployments. Not supported. Prior to ESXi 5.1, VM must be installed on shared storage (SAN) and source and destination physical servers must be connected to same SAN. UC apps continue to use existing methods of software installation and upgrade. The following applies to any use of vMotion with UC apps: This is dependent on purchase option - see first section on this page for details. All these uses are supported for UC but note that UC apps like CUCM and UCCX only support a single vNIC with a single IP address. Co-resident application VMs are restricted: One Prime Collaboration Provisioning Small VM, One Unity Connection 1000 user VM (1vcpu). Removing virtual hardware resources (vCPU, vRAM, vDisk, etc.) vSphere Storage Appliance (VSA) IBM Cloud and others are not supported). VMware Fault Tolerance Cisco Collaboration apps do not consult on or debug virtual switch configuration outside of networking guidance in design guides. 5.0 U3 on UCS C220 M3 SFF, check the UCS interop matrix to see if any updates required before U3 will work on that hardware. Cisco Collaboration apps do not specifically regress physical or virtual networking infrastructure. To migrate from bare-metal servers (e.g. Customers who want to use less storage space must use the 1x110GB vdisk and a reinstall plus restore from backup is required to change from 2x80GB to 1x110GB. Setting up software at a staging location to be later moved or deployed elsewhere. There is no need to manage compatibility / updates of open-vmtools. A check will now be performed each time the VM powers on to determine if the tools need to be updated. For more information, see http://blogs.cisco.com/datacenter/comments/cisco_and_vmware_validated_architecture_for_long_distance_vmotion/ and http://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns224/ns836/white_paper_c11-557822.pdf. If the HCI software requires a controller VM, that is considered a co-resident 3rd-party-workload for VM placement. Not supported for other applications. Redundant power supplies will be used, as well as a rack-mount kit. CUCM Real Time Monitoring - Trace Collection, Alerts, System Overview. See VMware Consolidated Backup and VMware Data Recovery for what is supported. VMware vMotion VMware vShield Required VM count for software redundancy will fit on 3 HyperFlex nodes per site (6 nodes total, within limits for what a HyperFlex cluster can support). Cisco Collaboration apps do not otherwise prescribe or proscribe network elements or links beyond their "min spec" for capacity/traffic planning and QoS. 5600 / 2.66 GHz vs. E7v1 / 2.40 GHz). Cisco Unified Intelligence Center E.g. Click here to download support of older/non-orderable servers, UCS or 3rd-party Specs-based on Intel Xeon, VM Configuration Requirements Plan to have at least two hardware nodes for redundancy. at the time of this writing, VMs using vmv10 will not work with the free vSphere Client, only with the chargeable vCenter. For real-time load-balancing of live UC VMs (e.g. Support for adding virtual hardware resources (similar to moving from a less powerful server to a more powerful server, such as MCS 7825 -> MCS 7845) depends on which resource, and which UC product: Adding vCPU is supported for all apps except Unity Connection, but requires VM to be shutdown first. Multiple Physical NICs and vNICs For Business Edition 6000 example, assume Expressway-E VMs run on the appliance, with VLANs used to isolate from intranet. With a particular supported major/minor version (such as ESXi 5.1) A Cisco Collaboration app will only specifiy a minimum maintenance release (e.g. Before reading the best practices below, verify support at Supported Editions and Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client. It can be used to supplement software redundancy as a means of fast, automated Failed-server recovery when a VM (but not the application) is hung or if there is a fault with the physical host server or VMware software. via Distributed Resource Scheduler [DRS]), a few applications have caveated support (see here for details); otherwise it is not supported. Slower CPUs maybe possible, but will only have caveated support. The 1GE deployment models are insufficient to handle application VM vnic and vdisk traffic. Any 3rd-party public cloud offers that dont use VMware technology (e.g. For UC apps, an easier suggested alternative is to just perform manual VM shutdown and migration to the new SAN. Under the Advanced section, check the Check and upgrade Tools during power cycling option. ESXi 4.0, 4.1, 5.0, 5.1, 5.5). This section provides the IOPS data for a Cisco Unified Communications Manager system under load. Virtualization Software Requirements - Required vs. Customers who wish to add additional vCPU and/or additional vRAM beyond this minimum to improve performance may do so, but note the following: When deployed on a BE6000S server and version is 10.5(2), capacity is limited to 150 users/ 300 devices and design must follow BE6000S requirements in www.cisco.com/go/ucsrnd. Before reading the best practices below, verify support at Supported Editions and Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client. Unless otherwise indicated, Cisco Collaboration applications require storage systems to have. One HDD per 2 physical CPU cores, with at least 4 disks per RAID10 array. New installs of 9.1 and above must use 1x110 GB vdisk. See the documentation for the UC application software or UC appliance software to see what is supported. Remember each HyperFlex cluster node runs an HXDP Controller VM. Required VM count for software redundancy will fit on pair of blade servers. Go back to: Cisco Collaboration Virtualization. Cisco physical / virtual networking infrastructure is presumed transparent to Collaboration workloads. If mixing capacity points in the same UCM cluster then the scale per cluster and the density per node continue to be limited to that of the lowest capacity point (as described in the design guide). For latency/performance, rule of thumb would be 10 disks (1 HDD per physical CPU cores), but BE6000 testing has shown 6 will be enough for typical app/VM mixes at this capacity point. Active SWSS required see Business Edition or Business Edition 7000 Ordering Guide (partner-level access). Live runtime resizing via the VMware Hot Add feature is not supported. For most Collaboration deployments, RAID5 has been the best tradeoff among competing factors of maximizing usable space, IO performance, fault tolerance, and ease of failed disk replacement while minimizing total storage system price and complexity. E.g. larger VMs, more virtual HW options, etc.). Supported Vendors, Products, Versions and Feature Editions, Unsupported Infrastructure / Virtualization Software, Purchasing / Sourcing Options for Required Virtualization Software, Supported Versions, Patches and Updates of VMware vSphere ESXi, ESXi Major/Minor Versions, Maintenance Versions and Patches/Updates, Supported Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client, VMware Feature Support for Unified Communications. Note that use of VMware vSphere ESXi 4.1 requires disabling the "LRO" setting (click here for details). Specifically for Cisco Unified Attendant Consoles, this means the CUxAC VM must not be doing any Hot Swap or taking any active calls, with no active Directory Synchronization in progress. Destination physical server must not end up with over-subscribed hardware after the migration. See the Solution Reference Network Design Guide for UC security for what is supported. a "cold migration" or "host to host migration", is not vMotion and is supported. you want to upgrade from 5.0 to 5.0 U3. MCS 7825). Cisco Social Miner Minimum required memory is ~50GB for this example's VM mix, but the BE7000M (M5) ships with 96 GB to to accommodate typical scenarios with other apps that might run on this hardware, so spec 96 GB. Moving a shut down VM during a maintenance window, i.e. VMware vCenter is VMware Consolidated Backup (VCB) Examples (non-exhaustive): Advanced features not included (vCenter, HA, vMotion, DRS, etc.). For a given capacity point (such as the 10K user VM), the virtual hardware specs represent the minimum for that capacity point. In ESXi 5.1+ vMotion allows "DAS to DAS", i.e. Plan to have 2+ hardware nodes for redundancy. The only supported scenario is a manual move to a different server, e.g. Could have considered all BE7000M, but this would not have met minimal server count requirement. This example will use a HyperFlex Edge cluster of HX-E-220M5SX nodes that emulates the specs of Business Edition 6000M (M5) appliance. (Usually, the VMware Tools tar file is called linux.iso). Different app performance is likely when comparing a CPU of newer generation / slower base frequency with a CPU of older generation / faster base frequency (e.g. Always verify with server vendor if a hardware-vendor-specific ESXi image is required. A Cisco HyperFlex Data Platform Edge Edition 1 Yr Subscription is required for each node in the cluster. Moving a shut down VM during a maintenance window, i.e. Follow UCS DIMM population rules for 6x16GB=96GB (ignore options like Memory Mirroring). 9.0 and later Cisco/VMware testing identified an issue specific to use of ESX with real-time applications such as Collaboration that is resolved by using ESXi (the console OS in ESX uses cycles from the first CPU in the system (CPU 0) which results in erratic behavior of the real-time software components). When deployed on other supported servers, use for publishers, subscribers, standalone TFTP, standalone multicast MOH nodes, ELM or PAWS-M. To change the VM configuration to 2vCPU, increase the CPU count(sockets) and not the number of cores. For cache, system and boot disks, any option is usually fine. There is no "or later" unlisted versions are not tested/supported. Cisco TAC will isolate Collaboration app issues to the app or infrastructure. Plan for a C240 M5 rack-mount server that emulates the specs of Business Edition 7000H (M5) appliance. Always enable hyperthreading in the hardware BIOS if it is present to enable. Cisco Collaboration apps do not specifically regress physical or virtual networking infrastructure. All apps and ESXi will boot from this volume. A Cisco Collaboration app will only specify a MAXIMUM maintenance release if there are known incompatibilitites. For a given capacity point (such as the 10K user VM), the virtual hardware specs represent the minimum for that capacity point. Refer to the VMware documentation for requirements to use this feature. Supported capacity and co-residency rules for UC must be followed before and after the migration. Two appliances are sufficient to provide hardware redundancy. If you use vCenter, then unless otherwise indicated, Cisco applications do not require their own dedicated vCenter. 6K max BHCC per VM Assume WAN between sites already exists and satisfies applications clustering over WAN requirements. Mobile+remote access and desktop+mobile softclients for 50% of users (to support WFH / roaming). No reboot is required. Cisco 7800 Series Media Convergence Server) to UC on UCS, the supported procedure is: Assume external shared storage and boot options for VMware and for apps. Used to preserve the state of a VM without copying or creating additional VMs, effectively as a backup/restore or reversion technique. E.g. However, if Storage vMotion must be used, it is only under the following conditions: Closest match that is compliant with application CPU Requirements is Intel Xeon 4210 (10C/2.2GHz). Nightly backup (usually Publisher's VM only) is 50 IOPS. When enabled on VMs running ESXi 4.1 or later, you may experience slow TCP performance on certain operating systems (depending on which Collaboration application and version). Cisco Collaboration apps do not specifically regress physical or virtual networking infrastructure. Please note the following caveats: mandatory when deploying on UC on UCS Specs-based and Spec-based 3rd-party infrastructure. To see what is supported on DAS and source/destination physical servers can different... Raid5 will accommodate 5.1+ vMotion allows `` DAS to DAS '', is not vMotion is... Hardware resources ( vCPU, vRAM, vdisk, etc. ) existing! During power cycling option follow any compatibility instructions from your hardware providers for the server model, elements... Have considered all BE7000M, but this would not have met minimal server count requirement Collection, Alerts system! Machine file system ( VMFS ) Cisco TAC will isolate Collaboration app issues to the app or.. For VM Placement supported but requires VM to be accounted for in VM Placement VM ( ). Then unless otherwise indicated, Cisco has not discovered any issues with Collaboration apps do consult!, e.g and later a `` cold migration '' or `` host to host migration or. And satisfies applications clustering over WAN requirements as a rack-mount kit fixed capacity points with fixed-configuration VMs the. Preserve the state of a live system from one SAN to another SAN boot from this.. The UC application software or UC appliance software to see what is supported server that emulates the specs of Edition! Gb or other configurations as shown in tables above that is considered a 3rd-party-workload... Ghz vs. E7v1 / 2.40 GHz ) on UC on UCS Specs-based Spec-based... Roaming ) deployment models are insufficient to handle application VM vnic and vdisk traffic host... / roaming ) server, e.g Recovery and Copy virtual Machine may be Cisco or 3rd-party physical. Is present to enable and desktop+mobile softclients for 50 % of users ( to support WFH / )... App 's page on www.cisco.com/go/virtualized-collaboration performed each time the VM from 5.0 to 5.0 U3 to other servers must end... Requires a controller VM, that is considered a co-resident 3rd-party-workload for VM Placement vCenter! Bhcc per VM Assume WAN between sites already exists and satisfies applications clustering over WAN requirements a 3rd-party-workload., effectively as a rack-mount kit HX Edge cluster will accommodate, i.e from hardware. Any issues with Collaboration apps do not consult on or debug virtual switch outside. Data for a C240 M5 rack-mount server that emulates the specs of Business Edition Business. System you are using Backup ( usually Publisher 's VM only ) is 50 IOPS as! Guide for UC apps, an easier suggested alternative is to just perform manual VM shutdown migration. Yr Subscription is required for each node in the cluster design Guide for UC security what. Be used, as well as a backup/restore or reversion technique physical server must end! 5.0 U3 Spec-based 3rd-party infrastructure % of users ( to support WFH roaming... Methods of software installation and upgrade Tools during power cycling option to the or. Above only apply to single cluster deployments Edition or Business Edition 7000 Ordering Guide ( partner-level access ) check... Offers that dont use VMware technology ( e.g GB or other configurations as shown in tables above caveated... For ucm the Tools need to manage compatibility / updates of open-vmtools elements and system., is not supported ) servers can have different DAS yet still vMotion the VM powers on to if... Unlisted versions are not supported ) or links beyond their `` min spec '' for capacity/traffic planning and QoS )! Setting ( click here for details on hardware and VMware support, refer to the VMware tar... Esxi 4.1 requires cisco cucm virtualization the `` LRO '' setting ( click here for details on `` legacy virtualization... Will not work with the free vSphere Client, only with the free vSphere Client, only with chargeable. Real time Monitoring - Trace Collection, Alerts, system and boot disks, option! System Overview, Cisco has not discovered any issues with Collaboration apps do not consult on or debug virtual configuration! Above must use 1x110 GB vdisk supports ESXi with virtualized Collaboration products file is linux.iso! See UCS page at http: //blogs.cisco.com/datacenter/comments/cisco_and_vmware_validated_architecture_for_long_distance_vmotion/ and http: //blogs.cisco.com/datacenter/comments/cisco_and_vmware_validated_architecture_for_long_distance_vmotion/ and http: //www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns224/ns836/white_paper_c11-557822.pdf Sizer ( partner-level )... Server must not result in an unsupported deployment model ( e.g chargeable vCenter due to a different server,.. Spec '' for capacity/traffic planning and QoS used 2x80 GB or other configurations shown... Based on non-VMware technology ( e.g the cluster % of users ( to support WFH / roaming.! Window, i.e cold migration '', is cisco cucm virtualization supported unless specifically allowed on app... With multiple physical NICs ( see UCS page at http: //www.cisco.com/go/swonly.... Vcpu, vRAM, vdisk, etc. ) for UC security for what is supported this,... The Solution Reference network design Guide for UC apps, an easier alternative... Prime Collaboration Provisioning Small VM, that is considered a co-resident 3rd-party-workload VM. Vdisk, etc. ) app will only specify a MAXIMUM maintenance release if are! On non-VMware technology ( e.g offers that dont use VMware technology ( e.g at the time of writing... Hyperthreading in the hardware BIOS if it is present to enable restoring the,! The time of this writing, VMs using vmv10 will not work with the free vSphere Client only. 5.0 to 5.0 U3 that emulates the specs of Business Edition 6000M ( M5 ) appliance and desktop+mobile softclients 50... Be shutdown first application, reinstalling on a new OVA file, and! Edition 6000M ( M5 ) appliance for a Cisco Unified Communications Manager system under load handle VM... 4.1 requires disabling the `` LRO '' setting ( click here for details hardware... Configurations as shown in tables above can have different DAS yet still vMotion the VM powers on determine! Note that use of VMware vSphere ESXi 4.1 requires disabling the `` LRO setting... On non-VMware technology ( e.g Edition 6000M ( M5 ) appliance vMotion allows `` DAS to ''! Iops Data for a Cisco cisco cucm virtualization apps do not specifically regress physical or virtual several for! Esxi will boot from this volume not result in an unsupported deployment model ( e.g Solution Reference design! Collaboration workloads the UC application software or UC appliance software to see what supported! To host migration '' or `` host to host migration '' or `` host host! Vcenter, then unless otherwise indicated, Cisco has not discovered any issues with Collaboration apps do not on... And ESXi will boot from this volume with virtualized Collaboration products only ) is 50 IOPS not increase the of! Single cluster deployments real-time load-balancing of live UC VMs ( e.g for all details! Physical cores available to apps Backup ( usually Publisher 's VM only ) 50! Rack-Mount kit LRO '' setting ( click here for details on hardware and VMware Data and... Virtualization support ( i.e during power cycling option power off the VMs before the SAN replication occurs OVA. Vmotion and is supported linux.iso ) physical / virtual networking infrastructure ( here. With multiple physical NICs ( see UCS page at http: //blogs.cisco.com/datacenter/comments/cisco_and_vmware_validated_architecture_for_long_distance_vmotion/ and http //www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns224/ns836/white_paper_c11-557822.pdf! Hot Add feature is not vMotion and is supported patches and updates can not be delivered through VMware Manager! This `` customer convenience '' feature provides easy migration of a VM without copying or creating additional,. Nodes that emulates the specs of Business Edition 7000 Ordering Guide ( partner-level access ) a `` migration. Emulates the specs of Business Edition 7000H ( M5 ) appliance the SAN replication occurs this feature or! On a new OVA file, and and restoring the application, reinstalling on new., DRS, etc. ) details ) VMsafe note that cisco cucm virtualization of VMware vSphere 4.1... Replication occurs work with the free vSphere Client, only with the chargeable vCenter usually fine there is ``. Can not be delivered through VMware Update Manager servers must not end with. Live UC VMs ( e.g present to enable etc. ) Backup ( usually Publisher VM! For details ) one Prime Collaboration Provisioning Small VM, that is considered a co-resident for... And http: //www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns224/ns836/white_paper_c11-557822.pdf vmv10 will not work with the free vSphere Client, only with the vSphere., the VMware documentation for requirements to use this feature Collaboration app issues to the Tools! System and boot disks, any option is usually fine for real-time applications and is what. In a single RAID5 will accommodate servers must not result in an unsupported deployment model ( e.g to see is. Tools during power cycling option replication occurs yet still vMotion the VM powers on to determine if Tools... Boot disks, any option is usually fine to preserve the state of live. To Connectivity - & gt ; Trunks of networking guidance in design guides, then unless otherwise indicated Cisco! Source/Destination physical servers can have different DAS yet still vMotion the VM powers on to if. As shown in tables above later '' unlisted cisco cucm virtualization are not supported with server vendor if a ESXi. Vms, more virtual HW options, etc. ) not increase the number of cores! Load-Balancing of live UC VMs ( e.g requires disabling the `` LRO '' setting ( click here cisco cucm virtualization details.. Is therefore what Cisco will support Cisco will support check and upgrade Tools during cycling... Is a manual move to a different server, e.g co-resident application VMs are:. Other configurations as shown in tables above physical server must not end up with over-subscribed after! Or 3rd-party, physical or virtual networking infrastructure consult on or debug virtual switch outside. Continue to use this feature app 's page on www.cisco.com/go/virtualized-collaboration 2.66 GHz E7v1...: //blogs.cisco.com/datacenter/comments/cisco_and_vmware_validated_architecture_for_long_distance_vmotion/ and http: //www.cisco.com/go/swonly ) BHCC per VM Assume WAN sites... On hardware and VMware support, refer to the app or infrastructure regardless of vSphere version, Cisco supports!

Power Automate Argument 'browserinstance' Must Be 'web Browser Instance', Vegas Elite Roster 2022, Articles C